- Posts: 37
- Thank you received: 17
Making CDS (temperatures)
- healthfreedom79
-
Topic Author
- Offline
- Junior Member
-
I am making it right now with the shot glass inside a container.
the shot glass is very small but high and I put 5ml of MMS and 5 ml of HCL 4% in it yesterday around 1700hrs.
it is now 1400 hrs and it is still brownish inside the shot glass but the water is already very yellow.
i put 250ml of water in the container.
I know the video states to do 2 times 24hrs with 5ml each.
it is kind of cold in the kitchen where I make the solution and I was wondering how much this could affect the reaction and reactiontime of the 2 components.
UPDATE: almost 24hrs and still brownish/red in the small shot glass. it is nice sunflower yellow.
I am going to let it sit for another 24hrs.
Please Log in or Create an account to join the conversation.
- CLO2
-
- Offline
- Administrator
-
Please Log in or Create an account to join the conversation.
- healthfreedom79
-
Topic Author
- Offline
- Junior Member
-
- Posts: 37
- Thank you received: 17
but it is slower than I had seen on the video you shared and also it is very yellow after 24 hrs.
I now put in a bigger surfaced glass and after about 1 hr it is almost very strong colored yellow already.
I will wait until the activator is the same color as the water around. I doubt if I have to do a second round of activation because its so strong colored yellow.
Please Log in or Create an account to join the conversation.
- healthfreedom79
-
Topic Author
- Offline
- Junior Member
-
- Posts: 37
- Thank you received: 17
Please Log in or Create an account to join the conversation.
- Jeranie
-
- Offline
- Premium Member
-
- Posts: 117
- Thank you received: 82
Please Log in or Create an account to join the conversation.
- CLO2
-
- Offline
- Administrator
-
See attached PDF file showing the dual infusion method. The file is on my website, which is where Andreas found it.
- healthfreedom79
-
Topic Author
- Offline
- Junior Member
-
- Posts: 37
- Thank you received: 17
well I now did a new batch with a bigger glass this morning in the cold kitchen and it looks like it is ready and very well saturated.
I am going to do a 2nd time anyway just to see the difference with the first batch color-wise.
is there a maximum saturation in ppm cause I dont want to overdo it.
thanks in advance
update: seeing your pdf helped me answer that question to. thanks
Please Log in or Create an account to join the conversation.
- healthfreedom79
-
Topic Author
- Offline
- Junior Member
-
- Posts: 37
- Thank you received: 17
I did a second batch of CDS with the same technique. the second batch I did another 24hrs with new 5ml SCS and 5ml HCL.
not any difference in color though.
so I guess only a single time is needed if making CDS in colder environment.
I will test this again if I have test strips just to be sure!
Please Log in or Create an account to join the conversation.
- RJi
-
- Offline
- Premium Member
-
- Posts: 96
- Thank you received: 37
Please Log in or Create an account to join the conversation.
- healthfreedom79
-
Topic Author
- Offline
- Junior Member
-
- Posts: 37
- Thank you received: 17
But I dont make that much CDS now so i stick with the safe method for now.
just great to see I need even less product to make the same amount of CDS.
Takes a little longer but hey no rush!
Please Log in or Create an account to join the conversation.
Jim's Blog
-
Water Purification with MMS
Published on: November 15, 2026
Note: We frequently get asked the question: How to purify water with MMS/CD? Below is info from Jim in this subject… MMS1 for water purification: To treat plain clear water that you feel should be purified to kill disease pathogens, such as tap water from your faucet, I suggest adding 8 drops of MMS1 (activated …
-
The Bottom Line of MMS/CD Protocols
Published on: November 8, 2026
Remember, nearly all diseases and health problems can be remedied with MMS/CD by following the instructions closely. I want to say once more, that MMS/CD does not cure diseases. MMS kills pathogens and oxidizes poisons anywhere they might be, including in the water of the body. Once pathogens are wiped out and poisons are oxidized, …
-
Order is Important—First Things First
Published on: November 3, 2026
I have said this many times, but I’ll say it again. It is my belief, that many times if people are not getting well—if they are not seeing desired results it is often due to the fact that they are doing too many things all at once, or equally as important, they are not doing …
-
Inflammation in the Body
Published on: October 29, 2026
This is the answer to what MMS does for inflammation. Inflammation does not cause the problems in the body. Inflammation is the body’s response to disease of one kind or another for the purpose of protecting the body. If you have a swollen prostrate it is because there is some kind of a problem with …
-
Unpleasant Symptoms, Biofilms, Going Too Fast
Published on: October 14, 2026
Note: In a health context, a biofilm is a structured, highly organized community of microorganisms (such as bacteria or fungi) that adheres to a surface and is encased within a self-produced, sticky, gel-like matrix of proteins, DNA, and sugars. Instead of floating freely as individual cells, the microbes (bad stuff) physically cluster together to form …
-
Cravings/Weight Management/Blocked Veins
Published on: October 4, 2026
A conversation with Jim in 2010: D: Some doctors have told me that harmful pathogens have the ability to manipulate the brain chemistry to make you crave the things they want to eat. Since I have been on MMS/CD, I have lost all cravings. I have also lost 60 pounds (which I needed to lose), …