Maintenance Capsule Method

In a few days I'll be going on maintenance. I was thinking to trying the capsule method just to experiment. Below is what one of the boarders said she does:

"I activate the 6 drops MMS in a glass for 60 sec, then suck the mixture out with an eye dropper, put it in the capsule (I use 00 size), add my 6 drops of DMSO, close the capsule. I put the water I need to drink in the glass I just activated the mixture, swallow the capsule."

Is this correct? Does this give the MMS and the DMSO a chance to bond? Is there a minimum amount of water I need to drink.

Also, I've never taken more than 3 drops of MMS at a time. Is it ok to all of a sudden go to 6 drops?

Thank you.

Hi
You can do any amount you feel comfortable with
3 drop dose per hour is the protocol 1000
PC2000 is up to 12 per hour.

There is no need to add water to casule in my opinion.
I never do.
I mix in a squirt top bottle and squirt transfer to gel cap.
Typically I do 5SC 5AC 5DMSO.
I add DMSO after 60 seconds and put in capsule.
Then under tongue and swallow with half glass of water.
DMSO has 60-90 seconds bond time in casule,
You can wait 90 seconds in mixer bottle if you like.
I don't.

How does the DMSO have 60 to 90 seconds to activate in the capsule when the capsule supposedly dissolves immediately? And Jim Humble says the DMSO needs 3 minutes after having been added to the MMS.

The capsule does not dissolve immediately. It takes 60-90 seconds.
You can of course fill a cap and time how long your specific caps last before melting.
You can wait 1 minute, then add DMSO then wait 2 minutes, put in capsule and swallow with water.
Jim has said MANY things.
We try and guide you to the results you seek given the latest information available either written or experiential.

Please let us know how you do.