Hydrochloric Acid from Hardware Store

masoomi wrote: hi
i am sorry if my pics is not good .
any way thanks for ur kindness .
parvin

Perfect!!!! Look like you have a 10 Normal solution that is the same of 10 Molar. To make the 4% solution

M1V1 = M2V2

(10)(X)=(1.09)(1000)
X = 109 ML of the 10N dilute to 1 liter to make the 4% or 11 ml dilute to 100 ml if you want only 3 ounces.

For the 5% solution

(10)(X)=(1.37)(1000)

X = 137 ML of the 10 N dilute to 1 liter to make 5% or 14 ml dilute to 100 ml if you want only 3 ounces of solution.

Only use Distilled water to dilute to the final volume. Is not add 137 to 1000 ml is add water to the 1000 ml mark. Let me know if you have clear this way to make solution.

NOTE
EVERY SOLUTION IS DIFFERENT SO DO NOT FOLLOW THIS TO MAKE OTHER PERSON SOLUTION UNLESS IS THE SAME PRODUCT PURCHASE FROM THE SAME SUPLIER. IN this case the Normality of the Acid is Know so the Percent of the solution is not required , same as the density or Specific Gravity. When the Normality is not know , the other two values are required to calculate the concentration of the concentrate solution.

supper !
thanks for ur care .
for making soultion , i should to take 100 ml distill water
in the seprat bottle and after with droper injet 14 ml
acide to 100 ml distill water .
am i right ,pls correct me .

parvin
i have a spirit bottel form before and now is empaty
but some smell only there , shall i use this bottle .or i should to
use new bottle .

masoomi wrote: supper !
thanks for ur care .
for making soultion , i should to take 100 ml distill water
in the seprat bottle and after with droper injet 14 ml
acide to 100 ml distill water .
am i right ,pls correct me .

parvin
i have a spirit bottel form before and now is empaty
but some smell only there , shall i use this bottle .or i should to
use new bottle .

Wrong!!!, I said fill to the mark. Do not add 14 ml to a 100 ml of distilled water that not a 100 ml solution is a 114 ml solution that was not the solution I calculate. The final volume has to be 100 ml.

You can reuse the old bottle that does not matter.

again pls check me .
i should to put 100-14=86 ml
86 ml distill water i put to my glass bottel
and after inject 14 ml acide to the distill water .
this suletion is 100 ml 5% acide is ready to use .
shall i put distill water in frege befor mixing ,to make it cool .
for less reaction between water and acide .
parvin

masoomi wrote: again pls check me .
i should to put 100-14=86 ml
86 ml distill water i put to my glass bottel
and after inject 14 ml acide to the distill water .
this suletion is 100 ml 5% acide is ready to use .
shall i put distill water in frege befor mixing ,to make it cool .
for less reaction between water and acide .
parvin

Excellent!! that how you should do it.

Cool water will make the amount more because the volume change with temperature. Keep both at the same room temp when you made them. Then you can put it in the fridge. But HCL solution are very stable at room temp. But Keep it very close tight because is a gas dissolve in water can escape easy to the atmosphere if leave it open. Lost a lot of strength that way.

OK
THAKS .

Hi mr giplaceres
today i made my hcl as u teach me (14 ml N/10 in 86ml distill water )
but when i make my mms1 (3 drops mms +3 drops hcl )
it was no any reaction , no any gas small or chenge color .
same as cirtic acid , so i did not use that mms1 .
is it correct soultion , even i use hcl n/10 without a water .
and it was same , pls help me where is wrong ?
parvin