Here's what I do to remove what looks like skin cancers, moles and warts with CLO2:
First I create and saturate a ball of tissue about the size of the area to be treated and then I tape it down with packaging tape so the CLO2 cannot escape and leave that in place for about 10 minutes and then remove it. I don't use any DMSO (but a drop or two would probably be a good idea to help with penetration) and I use full strength CDH4000 (so it's 4000 ppm CLO2). After a day or 2 the area, and the good skin around the area to be treated will turn brown and scab up. Eventually that will fall off and the result is that the problem is now gone. I see this approach as basically a way to use CLO2 to create a type of chemical burn that is safe to use in my opinion, and gets rid of the skin issue. I use if for stuff that looks like skin cancer, moles, and warts (with a wart I had, I had to do it many times plus I used a razor blade to cut the wart off as close to the skin as possible). If it doesn't remove it the first time, I just do it again and again until the problem is gone.
Hope that helps,
Scott
I'm Scott McRae, creator of "The Antidote" & CDH with CLO2's help (Charlotte Lackney)
- I did a CDH injection / Chlorine Dioxide (CLO2) injection / IV push of 10ml of dilute 50ppm CDH / CLO2 into my blood 3 times in 11 hours & did before & after blood tests that showed that it did NO HARM to my blood, liver or kidneys. This suggests the possibility that CDH / CLO2 is a potential LIFESAVING MRSA cure, VRE cure, CRE cure, AMR cure, Ebola cure, HIV cure, Cancer cure, etc., since it appears to be safe intravenously at 50ppm.
- Join our group on MiWi (was deleted off of Facebook):
mewe.com/join/coronavirusebolasolutions
- Every ml of CDH contains 1 drop of MMS, so 1 drop of MMS = 1ml of CDH
- MMS is 7 to 10% activated in 30 seconds while CDH made with 4% HCl is about 50% activated in the bottle. This is why CDH is far less nauseating than MMS drops
Skin cancers, moles and warts removed with CLO2
