MMS: sodium chlorite (NaClO2) 28%
MMS1 or Activated MMS: chlorine dioxide (ClO2)

file MMS MAKING

  • tykkeN
  • tykkeN's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
08 Jan 2024 02:52 #80981 by tykkeN
MMS MAKING was created by tykkeN
I've recently started making mms using the 2 drops 120ml water method. I've been making it inside, the other day I made some outside. After swirling the 2 drops together as I went to pour the water in I noticed a significant amount of gas escape. This is something I couldn't see or tell while doing it inside. My question is, is this a massive waste and if so how can I make sure I'm mostly efficient in capturing the gas using the fresh mixing procedure every hour. I feel like I've been wasting all my other glasses after seeing the amount of gas escape. Cheers in advance. New to the journey.

Please Log in or Create an account to join the conversation.

More
08 Jan 2024 15:46 - 08 Jan 2024 15:56 #80983 by CLO2
Replied by CLO2 on topic MMS MAKING
"I've recently started making mms using the 2 drops 120ml water method." Tell me about this method as I have not heard of it. Thanks. 

You must keep chlorine dioxide (CLO2) away from ultraviolet light from the sun and some light bulbs, because UV light will immediately cause CLO2 to react, gassing out chlorine gas. 

Amber colored glass bottles help to keep out UV light. Or, cover your dosing bottle with a black foam insulating cover  like this one . Count the number of sips from the bottle to estimate an hourly dose quantity of MMS1. 

You don't have to make 'fresh' hourly doses of MMS1. An all-day bottle of MMS1 works fine. Kerri Rivera suggests to only use an all-day bottle of MMS1 with autism patients. Her MMS1 autism protocol calls for 16 hourly doses daily. 

See attached PDF files. 
Last edit: 08 Jan 2024 15:56 by CLO2.

Please Log in or Create an account to join the conversation.

  • tykkeN
  • tykkeN's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
08 Jan 2024 21:47 #80989 by tykkeN
Replied by tykkeN on topic MMS MAKING
Thanks for the reply, the ultraviolet light makes sense being outside. I'm following the pdf that I've linked. I'll look at trying the all day bottle thanks.

Please Log in or Create an account to join the conversation.

More
09 Jan 2024 02:51 #80990 by Jeranie
Replied by Jeranie on topic MMS MAKING
It doesn't matter where you mix CL02. As soon as you mix the 2 solutions the chlorine dioxide will offgas. You probably just got a better look at it outside. Once you mix your desired amount, 2 drops, you want to add your water and drink asap. It will eventually offgas completely. You can take your time tho. A minute or two and you're not losing "massive" amounts.

The same goes with mixing a whole day's dose in a larger container. It needs to be air tight or it will also offgas as time goes by

Please Log in or Create an account to join the conversation.

More
09 Jan 2024 03:05 #80991 by CLO2
Replied by CLO2 on topic MMS MAKING
"It doesn't matter where you mix CL02."

So, UV light won't affect CLO2 gas extracted from SCS when making MMS1? Please explain why.  

You and Andreas Kalcker disagree on this subject. 
 

Please Log in or Create an account to join the conversation.

More
09 Jan 2024 17:47 - 09 Jan 2024 17:54 #80999 by Jeranie
Replied by Jeranie on topic MMS MAKING
Simple reason? Time. If you were to mix CL02 under UV light, sure it may/would gas off quicker than if you didn't. But it's not that big of a difference in the minute or two of making and taking the solution. In other words, it's not going to disappear on you in one minute if you decide to mix a 1,2, or 3 drop mix. AND, I've never heard of that particular problem. Are you sure you're not referring to the degradation of the sodium chlorite and HCL solutions? 
Last edit: 09 Jan 2024 17:54 by Jeranie.

Please Log in or Create an account to join the conversation.

More
09 Jan 2024 21:42 #81000 by Jeranie
Replied by Jeranie on topic MMS MAKING
So, UV light won't affect CLO2 gas extracted from SCS when making MMS1?

Can you tell me where to find that specifically explained by AK? That just doesn't make sense. I understand the necessity of amber/dark bottles for storage of SCS and HCL, and CDS etc, but the OP was specifically talking about mixing 2 drops with 120 ml of water to drink immediately. My response was to mix it anywhere you want. A minute or 2 of UV light has very little effect and the gas you see escaping happens no matter where you mix. My only point. 

Please Log in or Create an account to join the conversation.

More
11 Jan 2024 04:33 #81025 by CLO2
Replied by CLO2 on topic MMS MAKING
The reaction is immediate when UV light strikes a CLO2 solution. The off gassing is not CLO2, it is CL. I don't think anyone should be inhaling or ingesting chlorine gas. 

This is from Andreas Kalcker's book, Forbidden Health on page 60. 

"Another interesting aspect of chlorine dioxide is that it reacts to ultraviolet and solar light, turning into chlorine gas, and oxygen, which is why it must be kept away from both ultraviolet and solar light." 

Some LED lights will do the same. 
The following user(s) said Thank You: JanaL

Please Log in or Create an account to join the conversation.

Time to create page: 0.312 seconds

MMS Health Recovery Guidebook

The MMS HEALTH RECOVERY GUIDEBOOK is Jim’s latest book.  It provides the latest information on how to safely use MMS.  Click the book image to order your copy today.

Jim's Blog

  • Important Safety Tip on Mixing a Dose

    Published on: August 17, 2026

    Recently it has come to our attention that some people question if you need to take an MMS/CD dose in water. The answer is a big YES! All MMS (chlorine dioxide) doses, with whatever “variation” of MMS/CD one is taking, needs to be mixed in water. You NEVER take it straight. The standard is usually …

  • How does MMS affect bacteria in the body?

    Published on: July 24, 2026

    First facts, MMS does not kill friendly bacteria. What is the difference in useful bacteria and the harmful stuff? Well the feces of the useful bacteria is not poisonous and the feces of the harmful bacteria is poisonous and that is what makes one sick and causes the problems. Poisons have long chains of atoms …

  • MMS/CD and Plastics

    Published on: July 12, 2026

    Question: How does MMS interact with various plastics? Jim: In regards to your question about plastics, we really cannot give you a “sure bet” answer. This is because the world of plastics is vast, and like so many things in our environment, it’s difficult to know what is really what. To give you an idea, …

  • MMS/CD, Bacteria and Viruses

    Published on: July 5, 2026

    Question: Does MMS/CD kill bacteria and virus? Jim: Antibacterial drugs can sometimes stop bacterial [infections] diseases but medicine has yet to develop anything to stop viral infections. Thankfully, MMS/CD has been known to stop both viral and bacterial diseases. For either viral or bacterial infections, begin with the Starting Procedure and continue following the Health …

  • Importance of Following the Plan

    Published on: June 27, 2026

    Every week at least one new person approaches me with the question will MMS/CD help overcome some new disease. MMS/CD is an oxidizer that fits into the operation of the body in the exact right chemical balance to kill diseases and their poisons and eradicate heavy metals. Drugs must somehow attack the nucleus of the …

  • More is Not Always Better

    Published on: June 9, 2026

    In my books, there are times when one might need to take larger doses of MMS/CD. In Protocol 2000, for example you’ll find maximum dosage amounts. Some might take this to mean the more MMS one takes the better. But this is NOT necessarily so! More is not necessarily better, you need to listen to …