Making C D S

I recently made some CDS using the Andreas system,everything appeared to go well and i was quite
pleased with the results,but found that the tube used had burnt quite badly at the inlet side!! could this contaminate the mixture ? and would it be safe to use ? Also could you please give me specifcations for the correct plastic tubing required. regards and many thanks to all.

HI OLDSEEKER

1. 3' feet tubing 3/16" inch inside diameter, polyethylene is used by Bishop Jim Humble in his videos.

2. 2 oz. (60 ml) glass baby bottle with silicone nipple.

3. 8 oz (240 ml) glass baby bottle.

LaMotte 0-800 test strips Chlorine Dioxide.

thank you alfernandes,have copied that info and will investigate where to buy in NZ.
however i would like som opinions regarding the possible contamination and use of this present batch. In the meantime i will continue using the MMS solution

Hi Oldseeker,
If you find the LaMotte test strips in NZ would you please let me know where? Many thanks,
Liliana

HI OLDSEEKER AND LILIANA

Take a look at these site of New Zealand that selling CDS

www.miraclemineral.co.nz/cds.htm

Lamotte Tests Strips Chlorine Dioxide 0-800 ppm

International Sales

Australia

Vendart PTY.
2/16 Narabang Way, Belrose NSW 2085
Tel: 61 2 9450 0466
Fax: 61 2 0466 0775
Email: info@vendart.com.au
Website: www.vendart.com
Contact Name: Terry Van Heerden

For additional information on distributors or for product information, please contact the International Sales Department at LaMotte Company at intl@lamotte.com.


Note: This site above is what makes distributiond in Australia and New Zealand

The test strips should be chlorine dioxide, not chlorine (alone).

Test Strips, Chlorine Dioxide, 0-500ppm, 50 strips/vial




I get mine from Amazon.com in the US. Or from W.W. Grainger - an industrial supply

For tubing, you can use silicone, glass tubing, or HDPE - (high density polyethelyne) My first batch was made with vinyl tubing that did something weird, will admit. The second batch had that strange "burning" - but what it was, more than anything, was gas left over in the tubing at the end of the "make" that hardened into some weird plug, which looked like a burn - CDS is naturally a dark yellow gas - I used that batch completely with no problem. (on myself )

Pam

Thank you everyone for your help,especially Pam who gave me a very good answer as
that is exactly what happen'd in my case.

And the new method just posted today, the new video from Jim Humble, will resolve all the problems, I bet!!!! (Although, I'd still get the other tubing )

Great news pam.... thanks for the heads up !


Here's the link for the new video on YouTube:

Oldseeker, I have made every mistake possible making CDS, I think, except, I haven't had a bottle explode on me. I did have a situation once where sparks were flying back up a tubing when I put it outside to finish off=gassing (that was several CDS making episodes back) - (actually, I think it was the same one where I ended up with the plug at the end of the tubing).

I like this particular video because it's the most efficient use of the MMS that I've seen - even more efficient than MMS1, itself! And if you don't want to do the blowing, just hook it up to an aquarium pump, let some gas accumulate, and let the pump do the work.

My only comment is... and it wasn't mentioned in the video... I bet that the off- gassing would be better if the MMS and CA were kept at room temp rather than in the fridge - but that's not a big deal since with MMS the only thing you want to protect it from is UV, so it could be in a cabinet.

Once I use up the CDS I have stored in the fridge, I think I'll try this.